Intrinsically Safe Conventional Photoelectric Smoke Detector SLR-E-IS

Description

Model SLR-E-IS is a Photoelectric Smoke Detector designed for use in hazardous areas which also incorporates a remote indicator output and a removable chamber for easy maintenance. Each detector incorporates Hochiki’s unique High Performance Chamber Technology removing the need to use Ionisation detectors in the majority of applications. The High Performance Chamber has also enabled the detector threshold level to be increased, thereby improving t

Intrinsically Safe Conventional Rate of Rise Heat Detector DCD-1E-IS

Description

The DCD-1E-IS is an Intrinsically Safe Conventional Rate of Rise Heat Detector with a 60° fixed temperature element designed for use in hazardous areas. The unit also features a remote indicator output.

Explosion-Proof IR3 Infra-Red Flame Detector IFD-E(Exd)

Description

Model IFD-E(Exd) is an Explosion-Proof IR3 flame detector designed for use where open flaming fires may be expected and responds to the light emitted from flames during combustion.The detector discriminates between flames and other light sources by responding only to particular optical wavelengths and flame flicker frequencies. This enables the detector to avoid false alarms due to such factors as flickering sunlight. Ideal for the detection of flames from the burning of Aviation Fuels (kerosene), Butane, Grain & Feeds, Hydrogen, Paper, Natural Gas, Petrol (gasoline) etc.

Intrinsically Safe Industrial IR3 Infra-Red Flame Detector IFD-E(IS)

Features

  • Unaffected by convection currents, draughts or wind and solar-blind
  • Tolerant of fumes, vapours, dust and mist
  • ATEX certification to: EEx ia IIC T4 (135 °C) (zones 0, 1 and 2)
  • Responsive to a flame more than 25 m away
  • Selectable response speed
  • Class 1 performance as defined in BS EN54-10:2002 (on the high sensitivity setting)
  • Optical self-test
  • SIL Capable


Description

Model IFD-E(IS) is an Intrinsically Safe IR3 flame detector designed for use where open flaming fires may be expected and responds to the light emitted from flames during combustion. The detector discriminates between flames and other light sources by responding only to particular optical wavelengths and flame flicker frequencies. This enables the detector to avoid false alarms due to such factors as flickering sunlight. Ideal for the detection of flames from the burning of Aviation Fuels (kerosene), Butane, Grain & Feeds, Hydrogen, Paper, Natural Gas, Petrol (gasoline) etc.

Intrinsically Safe Conventional Call Point CCP-E-IS

Features

  • Supports either a ‘Frangible’ glass element or a ‘Non Frangible’ plastic element
  • Terminals can accommodate up to a 2.5 mm2 solid conductor
  • Approved to EN54 Part 12
  • Rugged design
  • ATEX Classification to II 1G Eex ia IIC T4


Description

The CCP‐E‐IS is a conventional call point based upon the industry standard KAC world series housing, and which can be used in hazardous areas.

Intrinsically Safe Weatherproof Conventional Call Point CCP-W-IS

Features

  • Sealed to IP67
  • Supports either a ‘Frangible’ glass element or a ‘Non Frangible’ plastic element
  • Terminals can accommodate up to a 2.5 mm2 solid conductor
  • Approved to EN54 Part 12
  • Rugged design, with anti-tamper facility
  • ATEX Classification to II 1GD Ex ia IIC T4 Ga


Description

The CCP-W-IS is a conventional weatherproof call point based upon the industry standard KAC World Series housing, and which can be used externally in hazardous areas.

Conventional Instrinsically Safe Mounting Base

Description

Model YBN-R/4(IS) is a Conventional Detector Mounting Base which should be used in conjunction with the SIL2 approved range of Intrinsically Safe detectors It is supplied with square cable clamps for secure and reliable cable termination but the base does not provide line continuity during detector removal, therefore if Call Points are being used then these should be wired onto the zone first.