Carbon Dioxide System (CO2) System

SFFECO Carbon dioxide (CO2) system extinguishes fire by reducing the oxygen content of the protected space and or local flame front to a point where it will not support combustion.

  • Cylinder Range: 2 kg to 100 kg
  • Standard Cylinder: 45 kg Cylinder
  • Available in Pnuematic, Mechanical & Electrical Actuation
  • UL Listed System using CO2 gas

Carbon Dioxide is an colorless, electrically non-conductive, non-corrosive, and non-deteriorating inert suppression agent. Carbon Dioxide is approximately 50% heavier than air, and is normally present in the atmosphere at about 0.03% by volume. Carbon Dioxide is instrumental in controlling respiration and other vital responses in animals and humans, but it WILL NOT support life.

Carbon Dioxide extinguishes fire by reducing the oxygen content of the protected space and/or local flame front to a point where it will not support combustion. Oxygen reduction below 16% by volume will extinguish most fires. Surface or “flash” type fires (oils, paints, etc.) are quickly extinguished. Deep seated or “smoldering” type fires (paper, baled cotton, clothing, etc.) are extinguished by the prolonged action of a high concentration of Carbon Dioxide. Retaining the agent within the protected space reduces the fire’s ability to re-ignite. In addition, Carbon Dioxide has a cooling effect on the surrounding atmosphere that has been found to be a benefit to fire extinguishment.

Kitchen Hood System

Fire has a greater chance of starting in a kitchen due to availability of flammable liquids and gas along with ignition materials. Kitchen fires in restaurants and hotels are classified as F Type Fire. The Best agent to be used is wet chemical agents to extinguish the fire effectively and efficiently with minimal damage and loss to the equipment and surroundings.

SFFECO Kitchen Hood System uses wet chemical agent for fire suppression and extinguishing. Our fast response and active kitchen hood system protects and keeps lives and property safe and secure.

  • Cylinder Range: 15 ltr to 50 ltr
  • Available in Mechanical & Electrical Actuation
  • System design as per global standards and in compliance with Local Government Authority requirements.

SFFECO Kitchen Hood System is easy to install and has a sensitive detection system and is affective in sensing fire from the source and injecting the wet chemical agent in a manner that suppresses the fire by forming a layer which cuts oxygen supply to the fire which as a result extinguishing of fire effectively and efficiently with minimal damage and loss to the equipment and surroundings.

Thermo Act System

SFFECO Thermo Act System is an advanced technology in the firefighting and safety industry. This System provides automatic activating suppression system contains and suppresses fire in seconds. SFFECO Thermo Act system is simple in design and installation which provides benefits of being low maintenance, cost effective and dependable.

  • Standard System: Clean Agent
  • Cylinder Range: 2 Kg & 6 Kg
  • Available in Mechanical & Electrical Actuation
  • System design as per global standards and in compliance with Local Government Authority requirements.

The Problem
With commercial spaces becoming complex and technologically advanced, it is common to have electrical enclosures which control and maintain devices and network. In a case where there is a fire in the enclosure the possibilities are that it would destroy the contents of the enclosure and also the fire can spread and destroy other equipments and spread to the entire room or the building.
The Solution
SFFECO Thermo act offers a dependable, cost effective and enhanced fire protection by detecting and suppressing the fire in the enclosure itself. Thermo Act detects and suppresses the fire inside the enclosure hence negating the the possibility of the fire spreading to the other areas in the room or the building.
SFFECO Thermo-Act systems utilize fire flexible tube for fire detection. Thus, the fire detection and extinguishing system is not required to detect and discharge
SFFECO Thermo-Act systems can be designed with commercial available agents including clean agent, wet chemical, Foam, and dry powder. The systems may be arranged as

Thermo-Act Extinguishing System Range

Direct System
SFFECO Thermo-Act direct system for low pressure agent as shown below uses the flexible tube as both the detection device and extinguishing discharge system. In case of fire, the section of tube most exposed to heat will rupture forming a discharge nozzle. The suppressant agent is then completely released due to pressure drop in the tube.
Indirect System

SFFECO Thermo-Act indirect system for low pressure agent as shown below uses the tube as a fire detection device only. The fire suppression agent is delivered through a special copper or stainless-steel tubing system. Once the tube ruptures due to heat exposure, the drop inpressure activates the indirect valve to direct the flow of suppression agent to diffuser nozzles via a fixed tubing system. This system is usually used in large area.

 

SFFECO 1230 Clean Agent Suppression System

SFFECO 1230 Suppression System is a breakthrough and revolutionary product in the firefighting industry. The system uses Chemori-FK5112 Fire Suppression Agent which is UL Listed and FM Certified.

  • Cylinder Range: 38 lbs to 850 lbs
  • UL Certified system using UL & FM Suppression Agent
  • Available in Pneumatic, Mechanical and Electrical Actuation

1230 Clean Agent is completely colorless and is electrically non-conductive fluid chemical known as fulroketon, FK-5-1-12. It is a sustainable technology and is here to stay. 1230 Clean Agent has Zero ozone depletion impact and has extremely low global warming potential with a short atmospheric lifetime.

ABOUT SFFECO 1230 CLEAN AGENT SUPPRESSION SYSTEM

Chemori-FK5112 is a ground-breaking innovation in the firefighting and safety industry and comes with 20 Years Blue Sky℠ warranty against regulatory bans. SFFECO 1230 Clean Agent Suppression System comes with a extensive range of filling from 38lbs to 850lbs which can accommodate head valves from 1” to 3” range. The head valves are specifically designed and engineered to be actuated electrically, pneumatically or mechanically making it suitable for various design applications.SFFECO 1230 Clean Agent Suppression System is UL 2166 Certified, FM 5600 Listed and is compliant with NFPA 2001, NFPA 70/72, EPA, DOT 4BW500. SFFECO 1230 Suppression System is the only one across the MENA Region to have UL Certified and FM Listed Chemori-FK5112 Fire Suppression System.

SFFECO 227 Clean Agent Suppression System

SFFECO 227 Clean Agent Suppression System is one of the most echo friendly. It suppresses the fire by physically cooling the blaze by eliminating the heat energy which interrupts the combustion cycle to the point that the fire cannot sustain itself.

The 227 system gives a safe fire safety to people, life stock and assets by utilizing UL & FM certified HFC-227ea clean agent gas. The biggest challenge in using suppression agents that are eco friendly as sometimes the fumes that are produced during fighting fire can affect the ozone layer, however SFFECO 227 clean agent system is completely echo friendly and is a non-ozone depleting firefighting suppression agent.

  • Engineered System Cylinder Range: 20 lbs to 1200 lbs
  • Pre-Engineered System Cylinder Range: 3 lbs to 540 lbs
  • Available in Pneumatic, Mechanical and Electrical Actuation
  • UL Listed system using UL & FM Approved Clean Agent

SFFECO 227 Clean Agent Suppression System uses UL Certified and FM approved HFC227ea clean agent gas which is sourced from The United States of America. This firefighting agent can be used in occupied areas like residential towers and offices along with non-populated areas like warehouse and machine rooms.