SFFECO Foam extinguishers are multi-purpose, ideal for fires involving volatile liquids and freely burning materials such as paper, cloth, wood and furniture.
Suitable for Class A and Class B fire risk. Ideal to use Petrol Stations, Restaurants, etc.
Note: Foam extinguishers are not suitable for fires involving electrical risk
SFFECO Water extinguishers are characterised by their high performance, simple method of operation ideal for tackling freely burning materials such as paper, cloth, wood and furniture. These are good general purpose fire extinguishers and widely used as they are useful and cost-effective. Suitable for Class A fire risk.
Note: Water extinguishers are not suitable for fires involving electrical risk
SFFECO Wet Chemical Fire Extinguishers are used for cooking oil or fat fires. The fine spray gives almost immediate flame extinguishment while the wet chemical agent reacts with oil to form a soap-like film to seal the surface of the oil and cool it down to prevent re-ignition.
Ideal to use in commercial kitchens in connection with pre-engineered hood system
SFFECO Carbondioxide gas extinguishers are characterised by their high performance for fires involving an electrical risk like computers, office equipment and generators etc. CO2 is non-conductive, clean and safe, ensuring minimal damage to electrical equipment and furnishings.
Suitable for Class B fire risks.
SFFECO Dry Powder extinguishers are characterized by their high performance, simple method of operation and rapid fire knock down capability. They are ideal for vehicle and marine risks. SFFECO powder extinguishers contain high performance powder and these are one of the most powerful powder extinguishers in the world.
Suitable for Class A, B, C and Electrical Fires.
SFFECO portable dry chemical powder extinguishers are available as inside or outside cartridge types . A strike at the knob releases the CO2 gas into the surrounding powder area thus aerating and pressurising the cylinder for use.
Suitable for Class A, B, C and Electrical Fires.
SFFECO Mobile Dry Powder Fire Extinguisher TDP and TDPS Models represent newly developed designs of pressurized fire extinguishers and are characterized by their high performance and rapid fire knock down capabilities.
Suitable for Class A, B, C and Electrical Fires.
SFFECO Mobile Dry Powder Fire Extinguishers with External CO2 Cartridge are fired in two stages. Turning the rotary valve on CO2 cartridge releases the CO2 into the cylinder filled with powder and the cylinder is filled with compressed aerated powder. This compressed aerated powder is released by pressing the control lever at the nozzle and directing at the fire.
Suitable for Class A, B, C and Electrical Fires.
SFFECO Mobile Foam Fire Extinguisher, available in stored pressure model (TF) and external high pressure CO2 cartridge model (TFC). Manufactured using special cold rolled steel and the cylinder is painted with electrostatic polyester powder.
This unit is easy to use and can be used by one person, suitable to keep in factories and warehouses, as well as petrol stations. The AFFF will quickly seal the surface of a liquid fire to prevent re-ignition.
Suitable for Class A and B Fires.
SFFECO Automatic Dry Powder Extinguishing Installation Type PD-Matic is a newly developed design, where in the Dry Powder is automatically ejected through the sprinkler head, after release of the thermo safety device on reaching a temperature of 68°C.
Suitable for Class A, B, C and Electrical Fires.
SFFECO Automatic / modular series is a self-contained stand alone system, ideally economical, simple and flexible to suit pre-prevailing local conditions. The Design concept of operation features the sprinkler technology incorporating a gas tight quartzoid bulb sprinkler head fitted with an optional pyrotechnic electric actuator, 24 vdc, means of actuating the system can be from a remote controlled release fire extinguishing control panel or thermally fusing the glass bulb which comes in various fixed temperature ranges.
SFM modular cylinders furnished with ceiling mounting brackets are of carbon steel material, factory argon/CO2 weld, sand blasted, white finished, oven baked and coated with electrostatic powder.
SFM extinguishment chemically known as heptaflouropropane (CF3-CHF-CF3) is a clean and effective environmentally accepted replacement for halon. It is effective fire extinguishing agent that can be used on surface fire of flammable liquids and solid combustible materials. Likewise, effective for total flooding of normally occupied areas to protect the highly invested equipment.
SFM modular automatic installations are primarily well-suited for the protection of oil furnaces and heating paint spray booths, flammable liquid storage areas, engine compartment in particular for boats, other work installations and small rooms that are particularly exposed to danger of fire. Cylinders are hydrostatically tested at 30 bar.
Suitable for Class A and B Fires.
